Hot Keyword:
The stored entry associates a Terry Jacquard Circular Knitting Machine with Morocco and includes three related photographs. Its older narrative described a company, creative gains, productivity and satisfaction without a traceable client record or measured trial. The revised case retains the country and machine family but replaces those claims with a staged sampling method.
Terry-jacquard development can waste time when artwork, yarn and finishing changes are made simultaneously. A disciplined project separates concept proof, construction proof and production release. Each stage answers a different question and produces a controlled sample, so a visually promising trial is not mistaken for a stable manufacturing recipe.
Prepare artwork with repeat dimensions, viewing face and marked priority details. Simplify elements that fall below practical knitting resolution before yarn is consumed in repeated trials. The first sample can use the proposed ground/pile construction to check selection and repeat closure, but every material substitution must be identified.
Judge motif boundaries, repeat seams and large/small design zones. Record the machine-ready file revision and mark any correction on both artwork and fabric. Do not overwrite the accepted concept with an unexplained later file.
| Sampling stage | Main decision | Exit evidence |
|---|---|---|
| Concept repeat | Can the motif be interpreted at the selected scale and face orientation? | Controlled file and marked repeat swatch |
| Terry construction | Do ground and pile yarns produce stable loops and acceptable coverage? | Yarn/feeder map plus loop-condition sample |
| Finished appearance | Does washing or other treatment preserve pattern and loop target? | Paired greige and finished pieces from one roll |
| Production release | Can the recipe run beyond a short sample and recover after an agreed stop? | Extended roll map, stop record and signed standard |
Identify yarn supplier, composition, count, lot and duty. The ground must support the fabric while the pile system forms the intended loop appearance. Inspect missed or pulled loops, uneven pile, ground show-through and tension bands. Map defects by roll and machine position before changing several settings.
Continue through package changes and an agreed stop/restart. Mark transition fabric and compare loop condition before and after the event. This exposes a recipe that works only in a short uninterrupted sample and provides the operator with a reproducible correction history.
Process a controlled section through the planned wash, dry or other treatment. Use consistent sample orientation and lighting to compare pattern clarity, loop presentation, dimensions and handle. Keep the greige parent. If the finished surface moves, the pair shows whether to investigate knitting, material or finishing rather than automatically edit the design.
The archived page does not verify diameter, gauge, feeders, output or included options. Bind the released recipe to the offered specification and state who owns pattern conversion, trial material, finishing and approval. A later design variant should inherit only the proven inputs and receive its own revision and sample gate.
A short motif swatch can confirm design interpretation without proving loop stability, stop recovery or finished consistency. Separate gates allow creative decisions to move forward while keeping production risks visible.
Any change in supplier, composition, count, twist, colour, finish or lot used in place of the intended ground or pile yarn should be recorded on the sample and reviewed before it becomes a reference.
Mark sample locations, stops, package changes, manual interventions, repeat or loop defects and every setting revision. Keep fabric before and after important events with the same identifiers.
No. The archive does not contain a named approval or measured comparison. Those outcomes depend on the buyer’s design process, material, order mix and accepted-quality definition.
This Morocco reference is useful as a terry-jacquard sampling roadmap. Buyers can send Kunyuan the artwork, ground/pile yarns and finishing target and require separate evidence for concept, construction and production release.
Tel: +86-13859034518
Email: info@kunyuanmachine.com
MP/WhatsApp: +86-13859034518
Manufacturer Address:Bacuo Village, Yonghe Town, Jinjiang City, Fujian Province
