YOUR POSITION：HOME > Video >

32-Inch Sweatshirt Circular Knitting Machine Overview

Author：KUNYUAN Manufacturer TIME：2026-08-27

Machine media reference

32-Inch Sweatshirt Circular Knitting Machine Overview

The archive identifies this topic as a 32-inch sweatshirt circular knitting machine. Sweatshirt fabric is a production target, not one guaranteed structure: the buyer must distinguish three-thread fleece, plated jersey or another construction and confirm gauge, feeder plan and finishing with the current model sheet.

32-inch sweatshirt circular knitting machine reference 1 — On-site machine image used to identify the configuration under discussion.

32-inch sweatshirt circular knitting machine reference 2 — On-site machine image used to identify the configuration under discussion.

Translate 'sweatshirt' into a construction

A common sweatshirt fleece uses face, tie and fleece yarn roles, while lighter sweatshirt styles may use a different loop plan. Diameter alone cannot decide the result. Record the desired face cover, fleece-loop character, finished weight, usable width, stretch and brushing or raising route before selecting the knitting setup.

Build the yarn and feeder plan

For three-thread fleece, the yarn counts, plating relationship and feeder sequence must keep the face clean while securing the back yarn. Take-down and loop length influence both greige stability and the amount of surface available for later raising. The old wording '22 needles' is not used as a specification; gauge and total needle count require confirmation from the actual configuration sheet.

Test the fabric through finishing

Knit enough material for relaxation and the intended dyeing, heat-setting, raising or compaction steps. Compare finished weight, width, shrinkage, pilling risk, fleece uniformity and face contamination with the approved reference. A short greige view cannot establish sweatshirt handle or final usable yield.

Evidence checklist for this topic

Decision point	Evidence to retain
Fabric target	Construction, face/back appearance and finished weight
Machine record	32-inch identity plus confirmed gauge and feeder count
Yarn map	Face, tie and fleece yarn counts and suppliers
Finished trial	Width, shrinkage, handle, raising result and defects

Boundary: The archived 32-inch topic is retained, but no unverified speed or output figure should be carried into a new offer.