YOUR POSITION：HOME > Video >

36-Inch 32G 108-Feeder Double Jersey Circular Knitting Machine

Author：KUNYUAN Manufacturer TIME：2026-08-27

Machine media reference

36-Inch 32G 108-Feeder Double Jersey Circular Knitting Machine

This record concerns a specific archived configuration: 36-inch diameter, 32 gauge and 108 feeders on a double-jersey machine. Those values are useful only when paired with the intended two-bed fabric, actual needle count, yarn conditions and a stable trial. The broken external playback link remains removed.

36-inch 32G 108-feeder double jersey circular knitting machine reference 2 — On-site machine image used to identify the configuration under discussion.

Read the three headline numbers correctly

Diameter describes the knitting circumference, gauge the needle spacing and 108F the feeder arrangement. None of them alone proves finished width or production. Cylinder and dial needle counts, cam tracks and feeder use must match the chosen interlock, rib or derivative construction; some feeders may have different roles within a repeat.

Fine-gauge preparation is part of the machine decision

At 32G, yarn uniformity, package quality, joins, fly control and knitting-element condition become especially visible. A yarn that runs on a coarser machine is not automatically suitable. Provide count, fiber, filament or spun construction and finishing route, then agree on loop-length and take-down trials rather than forcing speed before stability is known.

Define acceptance without a promotional clip

Ask for a continuous run that shows the model identification, control display, yarn paths, cylinder/dial area where safely visible, take-down and both faces of the labeled fabric. The acceptance sheet should record yarn lots, speed steps, stops, weight, width and defect map. Keep the roll for comparison at installation.

Evidence checklist for this topic

Decision point	Evidence to retain
36-inch	Confirm actual needle count and resulting greige form
32G	Confirm yarn count, joins, clearances and element condition
108 feeders	Confirm active feeder plan for the target repeat
Double jersey	Name the cylinder/dial structure and face/back standard

Boundary: A matching title on another clip is not evidence that it shows the same needle count, cams, feeder use or take-down configuration.